Storing The User Coupling Code; Resetting The App Security Code - eKey home series Operating Instructions Manual

Storing the user coupling code

The option is available to store a user coupling code. This can be passed on to a
person of your choosing, who can then use it to perform the following actions with
their mobile device:
□ Open a door
□ Enable/disable the app security code
□ Change the app security code
□ Reset the coupling between the finger scanner and your mobile device
Step Instruction
1st Start the ekey home app.
2nd Select ADMINISTRATION.
3rd Select
4th Enter the required user coupling code in the corresponding field.
5th
Confirm by selecting Change.
✓ The user coupling code was stored.

Resetting the app security code

If you have forgotten the app security code, you can use the app to reset the
coupling between the finger scanner and the mobile device. When this reset is
performed, the app security code is also reset to the default value of
Step Instruction
1st Start the ekey home app.
2nd Enter an incorrect app security code.
3rd
Confirm by selecting Next.
4th Select
5th
Confirm that you wish to carry out the reset by selecting Continue.
✓ The coupling between the finger scanner and the mobile device has been reset and
the app security code set to
You can now recouple the finger scanner.
See "Coupling additional mobile devices", page 18.
20│en Configuration of normal mode and usage of the finger scanner with the app
CHANGE SECURITY
RESET COUPLING.
9999 .
CODES.
9999 .