Changing The Admin Code - eKey home series Operating Instructions Manual

This function allows you to change the existing admin code. The admin
code may contain between 4 and 8 digits. The digits cannot all be the
same; at least one of them must be different.
The admin code can be changed via the Admin menu. Enter the admin
code to access the Admin menu.
See "Entering the admin code", page 41.
The system is in the Admin menu.
Step Action
1st
2nd
3rd
4th
5th
6th
Description
Press 3.
Press ✓.
Enter the old admin
code on the keypad.
Press ✓.
The old admin code
was not recognized.
Enter the admin code
from the beginning
again.
Enter the new admin
code on the keypad.
Press ✓.
The desired admin
code has already
been assigned as a
user code. Enter the
admin code from the
beginning again.
Display
Status LED lights
up green on the
left.
Status LEDs light
up green on the
left and yellow
on the right.
- -
Status LEDs light
up yellow.
Status LEDs light
up red.
- -
- -
Status LEDs light
up yellow on the
left and green on
the right.
Status LEDs light
up red.
- -
Changing the
admin code
en│43