Via The Control Panel - eKey home series Operating Instructions Manual

Via the control
panel
58│en
The process of resetting to the default settings is initiated via the control
panel.
Step Action
1st
2nd Variant a
Finger scanner
3rd Variant b
Code pad
The system was reset to the default settings. You can now recommission
the system.
See "Configuration of normal mode and usage of the finger scanner with
administrator fingers", page 29.
See "Configuration of normal mode and usage of the finger scanner with
the app", page 19.
See "Configuration of normal mode and usage of the code pad with
shortcuts", page 41.
Description
Press the button using
the operating rod (ekey
home CP mini 1/2) or a
small screwdriver (ekey
home CP micro 1) and
hold it down for at least
4 sec.
-
Display
The status LED
of the finger
scanner flashes
blue and the
status LEDs of
the code pad
flash green
alternately.
The top status
LED on the ekey
home CP mini
1/2 flashes
orange/green
and the LED on
the ekey home
CP micro 1
flashes green
slowly.
The top status
LED on the ekey
home CP mini
1/2 flashes green
and the LED on
the ekey home
CP micro 1
flashes green
slowly.