Storing Rfid Transponders - eKey home series Operating Instructions Manual

The system enables a maximum of 99 RFID transponders to be stored.
An RFID transponder is able to trigger an action on the control panel,
e.g., opening a door.
You can only store an RFID transponder with finger scanners with an RFID
function.
The system is in normal mode.
Step Action
1st
2nd
3rd Variant a
RFID
transponder
for relay 1
Variant b
RFID
transponder
for relay 2
Variant b
RFID
transponder
for relay 2
NOTICE
Description
Perform three Finger
Touches on the sensor
within 5 sec. This will
take you to the Admin
menu.
Swipe any administrator
finger over the sensor.
The administrator finger
was not recognized.
Swipe the finger over the
sensor again.
Carry out a Finger Touch
on the sensor within
5 sec.
Wait for 5 sec.
Carry out a Finger Touch
on the sensor within the
next 5 sec.
Display
Status LED
lights up blue,
function LEDs
light up green
alternately.
Status LED
lights up blue,
function LEDs
flash green.
Status LED
lights up red.
- -
Status LED
lights up
orange,
function LEDs
flash green.
Status LED
lights up blue,
function LEDs
flash orange.
Status LED
lights up
orange,
function LEDs
flash orange.
Storing RFID
transponders
en│33