Disabling Bluetooth; Coupling Additional Mobile Devices - eKey home series Operating Instructions Manual

The Bluetooth functionality can be disabled. Bluetooth functionality is set
to enabled in the default settings.
Step Instruction
1st Start the ekey home app.
2nd Select ADMINISTRATION.
3rd Select SYSTEM
4th
Under BLUETOOTH
Bluetooth after 15 minutes.
This setting disables Bluetooth on the finger scanner after 15 minutes if
one of the following situations arises:
□ No mobile device is connected
□ At least one finger has been stored
You can re-enable Bluetooth: Access the admin menu and swipe any
administrator finger over the sensor.
See "Storing user fingers", page 31.
You can couple additional mobile devices with the Bluetooth finger
scanner using the 6-digit admin/user coupling code you have chosen.
See "Storing the user coupling code", page 25.
Step Action
1st
2nd Follow the
instructions
on the
display
The coupling between the Bluetooth finger scanner and the mobile device
is established.
You can now start programming and managing the finger scan access
control system via the ekey home app.
STATUS.
SETTINGS, enable the setting Disable
Description
Start the ekey home app.
Couple the mobile device with the
Bluetooth finger scanner using the
6-digit admin/user coupling code
you have chosen.
Disabling
Bluetooth
Coupling
additional
mobile devices
Display
-
The status
LED lights
up blue, the
left-hand
function
LED lights
up orange.
en│23