Deleting All User Fingers And Rfid Transponders - eKey home series Operating Instructions Manual

Step Action
6th No action
required.
The RFID transponder was deleted. The system is in normal mode.
All user fingers and RFID transponders stored in the system are deleted.
The administrator fingers are retained.
The system is in normal mode.
Step Action
1st
2nd
3rd Variant a
Control panel
with 1 relay
Variant b
Control panel
with 2 relays
Variant b
Control panel
with 2 relays
4th
5th
6th No action
required.
Description
-
Description
Perform three Finger
Touches on the sensor
within 5 sec. This will
take you to the Admin
menu.
Swipe any administrator
finger over the sensor.
The administrator finger
was not recognized.
Repeat step 1.
Wait for 5 sec.
Wait for 5 sec.
Wait for a further 5 sec.
Carry out a Finger Touch
on the sensor.
Swipe the same
administrator finger over
the sensor as in step 1.
-
Display
Status LED lights
up blue.
Display
Status LED lights
up blue, function
LEDs light up
green
alternately.
Status LED lights
up blue, function
LEDs flash green.
Status LED lights
up red.
- -
Status LED lights
up blue, function
LEDs flash
red/green.
Status LED lights
up blue, function
LEDs flash
orange.
Status LED lights
up blue, function
LEDs flash
red/green.
Status LED lights
up blue, function
LEDs light up red
on the left and
green on the
right.
Status LED
flashes
red/orange,
function LEDs
flash green.
Status LED lights
up blue.
Deleting all
user fingers
and RFID
transponders
en│39