Configuration Of Normal Mode And Usage Of The Code Pad With Shortcuts; Entering The Admin Code - eKey home series Operating Instructions Manual

Configuration of normal mode and usage
of the code pad with shortcuts
The devices must have been commissioned before you start your system
administration.
See "Commissioning the system", page 15.
The system is in normal mode. The keypad is used for programming the
system.
Entering the admin code grants you access to the Admin menu. The
Admin menu is used to configure the system. The default admin code is
9999.
Change the default admin code immediately after commissioning!
If you do not change the admin code, it may be possible for unauthorized
persons to get into your Admin menu and then gain access to your
premises.
Choose a new admin code and keep it secret.
See "Changing the admin code", page 43.
ATTENTION
Entering the
admin code
en│41