Opening A Door - eKey home series Operating Instructions Manual

The primary purpose of the product is to open doors. This can be carried
out using the finger scanner, an RFID transponder, or the digital input.
The system is in normal mode.
Using the finger scanner
Step Action
1st
2nd No action
required.
The system is in normal mode.
Using an RFID transponder
You can only open a door using an RFID transponder on finger scanners
with an RFID function.
Step Action
1st
2nd No action
required.
The system is in normal mode.
Description
Swipe a stored user
finger over the sensor.
The user finger was not
recognized. Repeat step
1.
The door opens.
NOTICE
Description
Hold a stored RFID
transponder up to the
finger swipe area of the
finger scanner.
The RFID transponder
was not recognized.
Repeat step 1 with a valid
RFID transponder.
The door opens.
Display
Status LED lights
up green.
Status LED lights
up red.
- -
Status LED lights
up blue.
Display
Status LED lights
up green. Short
beep.
Status LED lights
up red. Long
beep.
- -
Status LED lights
up blue.
Opening a
door
en│35