Code Pad - eKey home series Operating Instructions Manual

Code pad

10│en
Function of the code pad
The code pad captures the pin code with the capacitive keypad. The code
pad compares what has been entered with the stored reference codes.
The code pad can handle pin codes containing 4 to 8 digits. The digits in
the pin code cannot all be the same; at least one of them must be
different. There are 2 types of pin code: The admin code for configuring
the system and the user code for opening doors.
If the code is entered incorrectly 3 times, there will be a 1-minute lock. If
the code is then entered incorrectly a further 3 times, there will be a 15-
minute lock. There will be a 15-minute lock each time the code is entered
incorrectly after that.
Controls, optical signals, and acoustic signals on the code pad
The code pad has 2 sections with controls.
Controls
Input buttons
Confirmation buttons
Table 2: Code pad controls
2 status LEDs signal the operating statuses (pin code correct, pin code
incorrect, menu item, etc.). An acoustic signal transmitter signals that the
button has been pressed and that access has been enabled.
Fig. 5: Code pad overview
The back-illumination of the keypad is blue, dimmable, and switches on or
off according to the lighting conditions.
Function
Enter pin code; select menu item.
Confirm pin code input as positive or negative;
start menu.
1 Left status LED
2 Right status LED
3 Input buttons
4 Confirmation buttons