Opening A Door - eKey home series Operating Instructions Manual

Opening a door

The primary purpose of the product is to open doors. This can be carried out using
the app, the finger scanner, or the digital input.
Using the app
 The system is in normal mode.
Step Instruction
1st Start the ekey home app.
2nd Connect to the finger scanner.
3rd Select ACCESSES.
4th
Slide the
5th The door opens.
✓ The system returns to normal mode.
Using the finger scanner
 The system is in normal mode.
Step Action
1st
2nd No action
required.
✓ The system returns to normal mode.
Using the digital input (request-to-exit button)
You can also open the door using the request-to-exit button of the digital input on
the control panel. The relay switches for the defined relay switch time. If the digital
input is enabled for longer than the defined relay switch time, the relay switches for
as long as the digital input is enabled.
22│en Configuration of normal mode and usage of the finger scanner with the app
slider of the door to be opened to the right.
Description
Swipe a stored finger over the
sensor.
The finger was not recognized.
Repeat step 1.
The door opens.
Display
The finger
scanner
lights up
green.
The finger
scanner
lights up red.
- -
The finger
scanner
lights up
blue.