Computer Input; Input Source Selection - Sanyo PLV-Z2 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose INPUT 2 by pressing the INPUT button on the top control or
on the remote control.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Select the Input Source Selection Menu with the Point Up/Down
button, and then press the Point Right button to enter the sub-
menu.
2 Select Input 2 with the Point Up/Down button and then press
the Point Right button. The Source Select Menu will appear.
3 Move the pointer to the source that you want to select and then
press the SELECT button.
When the input source is analog coming from a
RGB (Analog)
computer through the DVI terminal, select RGB
(Analog).
When the input source is digital coming from a
RGB (PC Digital)
computer through the DVI terminal, select RGB (PC
Digital)
INPUT button
Input 2
Input 1
Top Control Remote Control
INPUT
SELECT
INPUT button
Input Menu
Source Selection Menu
pointer
Closes the source selection menu.
31