Remote Control - Sanyo PLV-Z2 Owner's Manual

Part Names and Functions

Remote Control

q
w
e
r
t
y
u
i
o
12
q
LIGHT switch
Slides upward and lights the following buttons for about 10 seconds: SCREEN, ON-
OFF, LAMP, MENU, SELECT, INPUT, and IMAGE ADJ.
w
SCREEN button
Selects a screen size. (p30, 38)
e
LAMP button
Selects a lamp mode. (p41)
r
MENU button
Opens or closes the On-Screen Menu. (p21)
t
POINT (UP/DOWN/LEFT/RIGHT) button
Selects an item or adjusts value in the On-Screen Menu. These are also used to pan
the image in the Digital zoom mode. (p38)
y
INPUT button
Selects input source. (p23, 31)
u
INPUT1 buttons
Selects video input source. (p23)
i
MY PICTURE button
!0
Displays the captured image. (p40)
!1
o
KEYSTONE button
Corrects keystone distortion. (p20, 39)
0
!
POWER ON-OFF button
Turns the projector on or off. (p18)
!1
SELECT button
!2
Executes the item selected, or to expand or compress image in the Digital zoom
mode. (p38)
!2
IMAGE ADJ. button
Displays the On-Screen Menu of the Image Adjust Menu in a line and adjusts image
!3
level. You can directly adjust an item. (p28, 29, 37)
!3
IMAGE buttons
Selects an image level.(p27, 36)
!4
!5
!4
AUTO PC button
Operates the Auto PC adjustment function. (p33)
!5
NO SHOW button
Turns the picture into black image. (p20)
Luminous Buttons (u, i, o, !3 , !4 , !5 )
Luminous buttons (u, i, o, !3 , !4 , !5 ) emit light in a dark place after they are put
under light for a while.