Image Level Selection - Sanyo PLV-Z2 Owner's Manual

Image Level Selection

Direct Operation
Select an image level among Standard, Cinema, Game, Image 1,
Image 2, Image 3, and Image 4 by pressing the IMAGE buttons
(STANDARD (STD), PRESET IMAGE (P-IM), and 1-4 buttons) on the
remote control. (Each time you press the PRESET IMAGE (P-IM)
button, either Cinema or Game is selected.)
Standard (STD)
Normal picture level preset on this projector.
Cinema [PRESET IMAGE (P-IM)]
Picture level adjusted for the picture with fine tone.
Game [PRESET IMAGE (P-IM)]
Picture level suitable for playing a game.
IMAGE 1~4
User preset image in the Image Adjust Menu (p28, 29).
Menu Operation
1
Select the Image Select Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Choose the level that you want to select with the Point
Up/Down button and then press the SELECT button.
Standard
Normal picture level preset on this projector.
Cinema
Picture level adjusted for the picture with fine tone.
Game
Picture level suitable for playing a game.
IMAGE 1~4
User preset image in the Image Adjust Menu (p28, 29).
Remote Control
IMAGE buttons
Image Select Menu
Video Input
27