Terminal - Sanyo PLV-Z2 Owner's Manual

Part Names and Functions

Terminal

q
DVI-I RGB/COMPONENT
Connect computer output (Digital/Analog DVI-I type),
component video output, or RGB Scart 21-Pin video output to
this terminal. (p16, 17)
w
SERVICE PORT
This jack is used to service this projector.
e
VIDEO
Connect the composite video output from video equipment to
this jack. (p16)
* A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
10
q
e r
r
Y - Pb/Cb - Pr/Cr
Connect the component video output to these jacks. (p16)
t
S-VIDEO
Connect the S-Video output from video equipment to this jack.
(p16)
w
*
t