On-Screen Menu - Sanyo PLV-Z2 Owner's Manual

On-Screen Menu

You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
1 Press the MENU button to display the On-Screen Menu
(Main Menu).
2
Select a menu from the main menu by pressing the Point
Up/Down button, and press the Point Right button to enter
the sub-menu. (The selected icon turns yellow.)
3
Select an item by pressing the Point Up/Down button, and
activate the item that you have selected with the
(Point Left), or
(SELECT),
4 Press the MENU button to close the On-Screen Menu when
you are selecting a main menu. When you are selecting a
sub-menu, press the MENU button twice.
NOTE
G
If you are selecting a sub-menu or an item displayed in a line, pressing
the MENU button takes you back to the previous On-Screen Menu.
G
The On-Screen Menu disappears by holding down the MENU button
longer whatever you are selecting.
(Point Right) button.
Remote Control
Top Control
LAMP
REPLACE
MENU INPUT
SELECT
On-Screen Menu (Main Menu)
Point
Right
button
On-Screen Menu (Sub-Menu)
Basic Operation
SELECT button
MENU button
POINT button
POINT button
SELECT button
MENU button
Item
21