Keystone Adjustment; My Picture Function; No Show Function - Sanyo PLV-Z2 Owner's Manual

Basic Operation

Keystone Adjustment

If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
Press the KEYSTONE L/M button on the remote control or
1
select the Keystone in the Setting Menu (p39). The Keystone
dialog box appears.
Correct keystone distortion by pressing the KEYSTONE L/M
2
button or the Point Up/Down button. Press the KEYSTONE L
button or the Point Up button to reduce the upper part of image,
and press the KEYSTONE M button or the Point Down button to
reduce the lower part.
Reduce the upper width
with the KEYSTONE L
button or the Point Up
button.

My Picture Function

Press the MY PICTURE (MY-P) button on the remote control to
display a captured image. To restore to normal, press the MY
PICTURE (MY-P) button again or press any other button.

No Show Function

Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button.
20
Reduce the lower width
with the KEYSTONE M
button or the Point Down
button.
• The arrows are white when there is no correction.
• The arrow disappears at the maximum correction.
• The direction of the arrow being corrected turns
purple.
The message disappears after 4 seconds.