Image Level Selection - Sanyo PLV-Z2 Owner's Manual

Computer Input

Image Level Selection

Direct Operation
Select an image level among Standard, Real (P-IM), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE buttons (STANDARD
(STD), PRESET IMAGE (P-IM), and 1-4 buttons) on the remote control.
Standard (STD)
Normal picture level preset on this projector.
Real [PRESET IMAGE (P-IM)]
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset image in the Image Adjust Menu (p37).
Menu Operation
1
Select the Image Select Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Choose the level that you want to select with the Point
Up/Down button and then press the SELECT button.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1~4
User preset image in the Image Adjust Menu (p37).
36
Remote Control
IMAGE buttons
Image Select Menu
This check shows the level
being selected.