D-Link DWR-956 User Manual page 200

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
The following buttons are also available on the page:
Control
Factory
Backup
Restore
Save
Reboot
In the Idle time field specify a period of inactivity (in minutes) after which the router completes
the session of the interface. By default, the value 5 is specified.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Left Side Panel section, page 15).
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Page 200 of 221
Configuring via Web-based Interface
Description