D-Link DWR-961 User Manual

D-Link DWR-961 User Manual

Wireless ac1200 4g lte router
Hide thumbs Also See for DWR-961:

Advertisement

Version 0.01 | 09/19/2017
User Manual
Wireless AC1200
4G LTE Router
DWR-961

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWR-961

  • Page 1 Version 0.01 | 09/19/2017 User Manual Wireless AC1200 4G LTE Router DWR-961...
  • Page 2: Product Overview

    Section 1 - Product Overview Product Overview Package Contents DWR-961 Wireless AC1200 4G LTE Router Power Adapter 4G Antennas RJ-45 Cable If any of the above items are missing, please contact your reseller. System Requirements • A compatible SIM/UICC card with service.* •...
  • Page 3 10/100 Ethernet ports. The DWR-961 lets you connect to your 4G mobile connection with fast downlink speeds of up to 100 Mbps and uplink speeds up to 50 Mbps, giving you the speed to ensure fast, responsive Internet access. Surf the web with ease and stream music and video over the Internet to your PCs and mobile devices.
  • Page 4: Wireless Installation Considerations

    Wireless Installation Considerations The DWR-961 can be accessed using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range of the wireless signal.
  • Page 5: Getting Started

    Internet connection, the wireless/LAN status, and system information. At the top of the page is a menu. Clicking on one of these icons will take you to the appropriate configuration section. D-Link DWR-961 User Manual...
  • Page 6: Wan Service

    MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the WAN port’s MAC address with the MAC address of your PC. D-Link DWR-961 User Manual...
  • Page 7 Enabling this option will disable the NAT firewall function of the NAT disable: DWR-961, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings.
  • Page 8 NAT disable: Enabling this option will disable the NAT firewall function of the DWR-961, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings.
  • Page 9 If you choose Connect-on-demand, the device will Mode: establish a PPTP connection when local users want to connect to the Internet, and disconnect if there is no traffic after the time period defined by the Maximum Idle Time setting. D-Link DWR-961 User Manual...
  • Page 10 NAT disable: Enabling this option will disable the NAT firewall function of the DWR-961, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings.
  • Page 11 Internet, and disconnect if there is no traffic after the time period defined by the Maximum Idle Time setting. Maximum Idle The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature. Time: D-Link DWR-961 User Manual...
  • Page 12 NAT disable: Enabling this option will disable the NAT firewall function of the DWR-961, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings.
  • Page 13 Maximum Idle Time. Maximum Idle The time of no activity to disconnect your L2TP session. Set it to 0 or choose Always-on to disable this feature. Time: D-Link DWR-961 User Manual...
  • Page 14 NAT disable: Enabling this option will disable the NAT firewall function of the DWR-961, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings.
  • Page 15 Section 4 - Configuration 4G LTE Prefer Service Choose whether the DWR-961 should only use 4G networks, Type: networks, or use Auto Mode to automatically select a network. Username: Fill in only if requested by carrier ISP (optional). Password: Fill in only if requested by carrier (optional).
  • Page 16 Activate this feature to use the Ethernet WAN port as an additional Ports: LAN port. NAT disable: Enabling this option will disable the NAT function of the DWR-961, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Transparent...
  • Page 17 Click Prev to go back to the previous page or click Cancel to close the wizard. Note: The DWR-961 has a Multi-WAN Failover feature that allows the router to switch to a 4G connection if the WAN connection is down or unavailable.
  • Page 18 4G Connection: Choose this connection if you have installed a SIM card into the DWR-961. See 4G LTE on page 17 for information about how to configure this type of connection. Static IP Address...
  • Page 19 Choose the best security level supported by your wireless clients. Click Next to continue. Unless you chose None in the previous step, enter a security password. Clients must enter this password to connect to your wireless network. Click Next to continue. D-Link DWR-961 User Manual...
  • Page 20 Select your time zone from the drop-down box and then click Next to continue. This completes the Internet Connection Setup Wizard. Click Connect to save your changes and reboot the router. D-Link DWR-961 User Manual...
  • Page 21 Multi-WAN The DWR-961’s multi-WAN feature allows you to set your router to automatically switch to a secondary Internet connection if your primary Internet connection is lost. Note that you must first specify your primary Internet connection either on the WAN Service tab (see page 8) or the Wizard (see “Wizard”...
  • Page 22: Multi-Wan Configuration

    Turns the cellular radio on or off. This setting is intended to disable the cellular radio for areas where radio transmissions may be restricted. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 23 ISP. You can use the Clone button to replace the WAN port’s MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 24 ISP. You can use the Clone button to replace the WAN port’s MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 25 ISP. You can use the Clone button to replace the WAN port’s MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 26: Link-Local Only

    Link-local Only LAN IPv6 Link- Displays the IPv6 address of the router. Local Address: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 27: Static Ipv6

    Range (End): If you selected Stateful (DHCPv6), enter the address range end. Router Advertisement Enter the IPv6 address lifetime (in seconds). Lifetime: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 28 Range (End): If you selected Stateful (DHCPv6), enter the address range end. IPv6 Address Lifetime: Enter the IPv6 address lifetime (in seconds). Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 29 IPv6 LAN. IPv6 Address Range (Start): If you selected Stateful (DHCPv6), enter the address range start. IPv6 Address Range (End): If you selected Stateful (DHCPv6), enter the address range end. D-Link DWR-961 User Manual...
  • Page 30 Section 4 - Configuration PPPoE IPv6 Address Lifetime: Enter the IPv6 address lifetime (in seconds). Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 31 Select the IEEE 802.11 standard used by your wireless clients. Enable Auto Enabling this feature will allow the router to automatically scan for Channel Scan: the best wireless channel to use. Wireless If Auto Channel Scan is disabled, select the desired channel here. Channel: D-Link DWR-961 User Manual...
  • Page 32 Pre-Shared Key: Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers. D-Link DWR-961 User Manual...
  • Page 33 CONFIGURED to block WPS configuration of the router. Disable WPS-PIN Enable this option to prevent clients from connecting to the router Method: using the PIN method. If this option is enabled, clients must use the push-button method to connect. D-Link DWR-961 User Manual...
  • Page 34 WPS status: This will show the current WPS connection process status. Click the Trigger button to initiate a WPS connection. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 35 TX Rates: Select the basic transfer rates based on the speed of wireless adapters on your wireless network. It is strongly recommended to keep this setting to Best. D-Link DWR-961 User Manual...
  • Page 36 If the channel width is operating at 40 MHz and there is another wireless network’s channel over-lapping and causing interference, the router will automatically change to 20 MHz. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 37: Device List

    Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Mask: Local Domain Enter the local domain name for your network. Name: Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 38 DHCP The DWR-961 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically assigned to the clients on the network.
  • Page 39 Enter the Host Name that you registered with your DDNS service provider. Username / Enter the Username for your DDNS account. E-mail: Password / Key: Enter the Password for your DDNS account. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...
  • Page 40 Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications may have difficulty working through NAT (Network Address Translation). Applications allows some of these applications to work with the DWR-961 by opening ports after detecting traffic being sent through a trigger port.
  • Page 41 LAN > DHCP > DHCP Reservervation page so that the IP address of the DMZ machine does not change. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-961 User Manual...

Table of Contents