Creating Lte Wan Connection - D-Link DWR-956 User Manual

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual

Creating LTE WAN Connection

If the PIN code check is enabled for the SIM card inserted into the built-in modem, then prior to
creating an LTE WAN connection, go to the LTE Modem menu and enter the PIN code on the page
displayed (see the LTE Modem section, page 130). Then on the connection creation page, go to the
All Settings tab, select the relevant value from the Connection Type drop-down list, and
specify the needed values.
Figure 80. The page for creating a new LTE connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 95 of 221
Configuring via Web-based Interface
Description