D-Link DWR-956 User Manual page 128

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
You can specify the following parameters:
Parameter
Frequency band
SSID
MAC address
Hostname
Enable
When you have configured the parameters, click the SAVE button.
To edit the parameters of the existing rule, in the Filters section, left-click the needed rule. In the
opened window, change the settings and click the SAVE button.
To remove the rule from the page, in the Filters section, select the checkbox located to the left of
the relevant rule and click the DELETE button (
After creating the rules you need to configure the filtering modes.
Figure 104. The window for adding a rule for the MAC filter.
From the drop-down list, select a band of the wireless network.
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
In the field, enter the MAC address to which the selected filtering
mode will be applied.
The name of the device for easier identification. You can specify any
name.
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
Page 128 of 221
Configuring via Web-based Interface
Description
).