D-Link DWR-956 User Manual page 179

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
To change a short or actual phone number, select of the relevant line in the table. In the opened
window, change needed parameters and click the SAVE button.
To remove a phone number, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
To use a number specified in the Abbreviated Dial section, dial the needed short number on the
phone set.
In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the
Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule. You
can specify several rules separated by the character | (vertical bar). You can use digits (0-9), the
characters * (asterisk) and # (pound), and the following characters:
Parameter
[]
X
.
<>
In the Misc section, fill in the PIN code to dial field to allow the user of the phone to make calls
only after dialing the PIN code.
When all needed settings are configured, click the APPLY button.
).
Digits and/or the characters * and # within square brackets specify a
range of values for a certain position in the number.
Any digit, the character * or #.
Any number of repetitions (including none) of the previous digit or
character.
Angle brackets containing digits separated by : (colon) allow to
substitute the digit after the colon for the digit before the colon.
Page 179 of 221
Configuring via Web-based Interface
Description