D-Link DWR-956 User Manual page 181

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
To inform or not to inform the SIP server when a user dials the codes on the phone, in the Sending
to Server section, click the ALLOW or DENY button correspondingly.
To specify a call feature code for transferring a call to another phone, enter a code and click the
APPLY button (
Also the following call feature codes are available on the page:
Parameter
Disable Call Waiting
Enable Call Waiting
Disable Do Not Disturb
Enable Do Not Disturb
Enable Call Forwarding No
Answer
Disable Call Forwarding No
Answer
Enable Call Forwarding On Busy
Disable Call Forwarding On Busy Disables call forwarding when this line is busy.
Enable Unconditional forwarding Enables forwarding for all calls.
Disable Unconditional forwarding Disables forwarding for all calls.
Disable Hot Line
Enable Hot Line
Enable alarm clock
Disable alarm clock
Save configuration
Reboot device
To change parameters of a code, select the relevant line in the table.
). Use digits (0-9), the characters * (asterisk) and # (pound).
Page 181 of 221
Disables the call waiting function.
Enables the call waiting function.
Disables rejection of incoming calls.
Enables rejection of all incoming calls (the busy tone
will be heard).
Enables call forwarding when this line gives no reply.
Disables call forwarding when this line gives no reply.
Enables call forwarding when this line is busy.
Disables the hotline.
Enables the hotline.
Enables the alarm clock for the time specified for this
line.
Disables the alarm clock.
Enables saving the router's settings to the non-volatile
memory.
Enables rebooting the router. All unsaved changes will
be lost after the device's reboot.
Configuring via Web-based Interface
Description