Creating Pptp Or L2Tp Wan Connection - D-Link DWR-956 User Manual

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual

Creating PPTP or L2TP WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection Type drop-down list and specify the needed values.
Figure 67. The page for creating a new PPTP connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 81 of 221
Configuring via Web-based Interface
Description