Lan; Ipv4 - D-Link DWR-956 User Manual

DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual

LAN

To configure the router's local interface, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 85. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
IP address
Subnet mask
Device domain name
Local IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The name of the device attached to its IP address in the local subnet.
Page 100 of 221
Configuring via Web-based Interface
Description