G60X Module - Extreme Networks BlackDiamond 10K Series Installation Manual

Configuring I/O Modules

G60X Module

Figure 30 shows the G60X module.
Figure 30: G60X module
Module status LEDs
Mini-GBIC
ports
EX_005
The G60X module has 60 unpopulated Mini-GBIC-based Gigabit Ethernet fiber ports. If you have one
MSM module installed, all ports on the G60X module are switched through that MSM module. If you
have two MSM modules installed, the top 30 ports on the G60X module are switched through the MSM
module in slot A, and the bottom 30 ports are switched through the MSM module in slot B during
normal operation.
All Gigabit Ethernet ports on these modules use SPF fiber Mini-GBIC connectors and support
1000BASE-SX, 1000BASE-LX, 1000BASE-LX70, and 1000BASE-ZX.
The default configuration of the G60X module is as follows. All ports:
• Are added to the default VLAN as untagged
• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth)
Mini-GBIC Ports
The G60X module supports any of the following Mini-GBICs:
• SX mini-GBIC, which conforms to the 1000BASE-SX standard
• LX mini-GBIC, which conforms to the 1000BASE-LX standard
• ZX mini-GBIC, which conforms to the IEEE 802.3z standard
Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 69