Extreme Networks BlackDiamond 10K Series Installation Manual page 48

BlackDiamond 10808 Switch Chassis
4 Remove the four restraining bolts that secure the chassis to the pallet using an adjustable wrench.
Two bolts are at the front of the chassis, and connect to the pallet itself through holes in vertical side
bars. The remaining two bolts are at the sides and backs of the pallet.
NOTE
Save the packaging, including the carton, bolts, and attached washers for future use, in case you
need to return the BlackDiamond 10808 switch.
5 Have a minimum of two people grab both handles on each side of the switch and lift the switch
from the pallet.
6 Place the back of empty chassis on the helper bracket. Using the higher, front handles slowly guide
the chassis into the rack until it is securely seated.
48 Extreme Networks BlackDiamond 10K-Series Switch Installation Guide
EX_090