Extreme Networks BlackDiamond 10K Series Installation Manual page 82

BlackDiamond 10808 Switch Power Supplies and Power Supply Controllers
Figure 33: Sliding the power supply into the power bay
The AC input is located on the front of the BlackDiamond 10808 switch directly under each power
supply bay. The front of the power supply has a handle with a cam lever mechanism for both insertion
and removal of the power supply. The front panel also provides status LEDs. Table 16 describes the
LED behavior on the AC power supplies.
Table 16: AC power supply LEDs
LED Color
Power (PWR) Blinking Green
Solid Green
Off
Predictive Blinking Amber
Failure
Off
Fail Blinking Amber
Solid Amber
Off
82
Indicates
Power is present and standby output is on.
AC power is present and power supply is operating normally.
There is no power present.
A fan has slowed down and is about to fail.
The fans and power supply are operating normally.
There is a current limit on 48 VCD output.
The power supply has failed, or there is no AC power to this
power supply.
The power supply is operating normally.
EX_011
Extreme Networks BlackDiamond 10K-Series Switch Installation Guide