General Features of Ball Console
•
75 ball console
•
Slate gray cabinet with black trim, modular design
•
Red / Green / Silver ball chamber
•
Arm rest
•
Heavy duty casters, rear locking, front non-locking
•
Sealed Ball bearing blower motor with power on/off switch
•
Hepa air filter (HH246 Filter Replacement)
•
Anti-static control and metal ball tube
•
Dual ball chambers for reduced noise
•
Integrated digital camera
•
LED ball illumination
•
Spill resistant rubber ball switches
•
Raised ball for easy removal from ball tray
•
Integrated ball tray computer
•
Filler panels with cup holder and mounting rails to adjoin consoles
•
1 set of double numbered bingo balls
•
Operator manual
•
1 year warranty
Detailed System Specifications
Size:
Electronics console:
27.5" wide x 34.5" deep x 30" high, + 17" high for the monitor
196 lbs
Ball console:
40.5" wide x 34.5" deep with arm rest, x 30" high, +4.5" high for ball tube
165 lbs
Electronics and Ball console adjoined: 69" wide
Electronics and two Ball consoles adjoined: 109" wide
Environment:
Indoor use only, no condensation
Recommended Operating Temperature: 15C to 35C (59F to 95F)
Storage temperature: -5C to 45C (23F to 113F)
Regulatory:
C-UL US Listing (pending)
Electrical:
Flashboard outputs:
0 to 5V output, up to 150ma sink or source, short circuit and ESD protected
Fused for severe damage
Video outputs:
Composite video – 0 to 5V max, 75 ohm output, RCA jack
RF modulator – channel 3 or 4, 75 ohm output, Type F connector
Video inputs:
RF signal level from TV out or similar source, Type F connector
Audio outputs:
0 to 5V max, signal levels and output impedance not intended to directly drive speakers, stereo 3.5 mm
receptacle
Audio input:
Signal levels compatible with standard PC sound card, MIC IN circuitry.
E-max Gaming Corporation, Inc.
82