E-max BingoConsole Operator's Manual page 50

No camera image, and no
camera white LEDs are on
Camera does not display ball
image on Operator Monitor
Manual Mode switches do not
operate, switch LEDs are off
Manual Mode switch(s) do not
operate when Manual Mode is
enabled and LEDs are on.
All bingo balls do not return to
mixing chamber when the red
Door release knob is used
Ball Tray release (two black
knobs) do not return to their
normal position after releasing
balls into the ball tray chamber
Depressing the bingo ball on
the ball tray switch works the
first time, but not the second
time
Communications cable
unplugged
Dell computer not turned on
Dell computer defective
Led board defective
Program is not on the main
Operator gaming screen
Camera lens is blocked by
foreign material
Ball tube not centered over
camera
Camera defective
When the Dell computer is
normal, the switches are
disabled and LEDs are off.
Defective switch(s)
Defective Ball Tray
Defective Data Router
Dirty ball tray chamber
Improper ball tray return
spring tension or dirt
accumulation
During a given game, the
system disables all repeat
actuations of a ball tray switch
E-max Gaming Corporation, Inc.
50
Plug in Camera cable to Dell
USB port as shown in
Appendix
Depress Dell ON switch
Call for service
Call for service
Use touch panel to display the
main Operating gaming screen
Remove material from the
camera lens area
Rotate the ball tube until it is
centered over the camera
Call for service
System OK
Call for service.
Call for service.
Call for service.
Call for service.
Call for service.
System OK. The switch will
become active again on Next
Game.