E-max BingoConsole Operator's Manual page 21

The Live Game Screen (Figure 5.3) is now displayed with the Demo Schedule as the preloaded session. There
are several items that make up this screen:
•
Session / Game Info Upper left corner – The first line displays the Game # of the current Game, Next line
displays the Part # of the current Game, Next line displays the Last Ball called, then Total Calls in real
time for current game and the last line displays the Dollar Value for the current game.
•
Clock Display – Displays the current time and date in the upper right corner.
•
Flashboard Screen – Displays the same data output as the external flashboards.
•
Ball Call Timer – Displays a timer that counts down the number of seconds between ball calls.
•
Current Ball Status – Displays the number of calls, the last ball called and the ball activated timer count.
•
Game Pattern – Displays the current game pattern being played.
•
The Live Video Window – Is shown to help the caller place and align the last ball called in the center of
the hall monitor. When the game is set to the RNG mode a graphical representation of the last ball called
is shown. This window will also display an advertisement when selected from the advertisement screen.
•
Marquee –The current marquee will be displayed scrolling at the bottom of the Game Screen. Marquees
can be attached when a session is built or they can be selected from the Marquee screen.
•
Toolbar – The Live Game Screen Toolbar has buttons that can be selected during every bingo game.
Each of these selections will only affect the current game. Any permanent changes to the session's
parameters should be programmed in SETUP located at the Main Menu screen. (See Chapter 6 System
Programming – Creating a Bingo Session)
E-max Gaming Corporation, Inc.
21