11.7 Testing the Flashboards
To test the hall flashboards, follow the procedure below and refer to figure 11.7
NOTE: Lamp test is performed from the console utilities menu.
1. Power up the outlet strip
2. Power up the Back UPS
3. Power up the Dell CPU
4. Log into the system
5. select Utilities from the Main Menu
6. Touch the Lamp Test button
7. The lamp test screen will appear
8. Touch the Test button. (all flashboard lamps should turn on)
9. Touch the Reset button to turn the test off
Figure 11.7
E-max Gaming Corporation, Inc.
63