E-max BingoConsole Operator's Manual page 18

3. A Console Operator cannot change their password without an Organization/Hall manger.
The system requires a user to "Log On" to the system before access is granted. Only one user can be logged on
the system at a time. Therefore, a current user must "Log Off" the system for a new user to take control of the
system.
To log on to the E-max Bingo Console:
1. Slide your user Magnetic card through the reader (future Upgrade) or
2. Enter your user password
a. With finger touch
b. With mouse curser and clicks on the video keypad
c. With the Dell keypad
3. Touch the ENTER button.
Note: The Magnetic Card included with your E-max Bingo Console is the "system Key". You must not loose this
card! Keep the card in a safe place and protect it from damage. (Future Upgrade)
Initial Factory Security:
On a factory new console, a default name and password are entered into the database for a System Administrator.
The loaded information will be given to the proper personnel when installing the new console. The System
Administrator can log on the console to set up gaming and play games, however the system administrator must
enter user data for the Organization/Hall Mangers and Console Operators before they can use the console. An E-
max™ service representative or authorized distributor can provide assistance in the set up.
When assigning passwords for a Console Operator, use an easy to remember number since many volunteer
operators may use their password infrequently.
Passwords are a minimum of 4 and a maximum of 10 numeric digits.
E-max Gaming Corporation, Inc.
18