Configure The Operating System - E-max BingoConsole Operator's Manual

9. Touch the refresh button
10. A list of the available backups will appear on the screen
11. Select the file you wish to use for the restore by touching the filename
12. Touch the Restore button
13. The restore operation will operation will run
14. When the restore is complete the Arrow Recovery window will appear
15. touch OK
16. This will take you back to the system login screen
17. remove the backup CD from the drive

11.3 Configure the operating system

To configure the E-max™ console for RNG or Caller's Choice features, follow the procedure below and
refer to figure 11.3
Caution: Check with the local and state laws regarding caller's choice and random
number generator before installing these features on the E-max™ Bingo Console
1. Power up the outlet strip
2. Power up the Back UPS
3. Power up the Dell CPU
4. Log in as the system administrator
5. select Utilities from the Main Menu
6. Open the CDRW drive and insert the Arrow configuration CD.
(this is the bottom of the two drives)
7. Touch the Upgrade Software button
8. The upgrade software operation window will appear
9. Touch the refresh button
10. A list of the available software updates will appear on the screen
11. Select the file you wish to install by touching the filename
12. Touch the Install button
13. The install window will appear
14. Touch yes
15. The setup wizard window will appear after a few seconds.
16. Touch Next
17. The configuration options window will appear
18. select the options you wish to install by touching the check boxes
19. touch Next
20. touch Finish when the set up wizard window appears
21. When the configuration is complete the system will reboot and the security login screen will
appear
22. remove the configuration CD from the drive
E-max Gaming Corporation, Inc.
59
Figure 11.3