E-max BingoConsole Operator's Manual page 51

Bingo System Issues (as they relate to a Console problem):
Problem
No video image on the hall
Ball Monitor or Message
Monitor
Flashboards not operating
Add on Electronic gaming unit
system does not work properly
with new Console
Possible Cause
Video cable not plugged into
the console's RF Modulator or
Data Router
Video cable between the Dell
video card an the RF
Modulator or Data Router or
VCR not plugged in
RF Modulator power cord
unplugged
VCR turned OFF
VCR power cord unplugged
Defective RF modulator or
Data Router
Defective VCR
Flashboard cable not plugged
into the Data Router
Data Router problem
Dell computer problem
Flashboard type not
compatible with new Console
Not certified by Arrow as
compatible
E-max Gaming Corporation, Inc.
51
What to do or check
Check video cabling as shown
in the Appendix
Check video cabling as shown
in the Appendix
Plug in power cord to the
Outlet strip as shown in the
Appendix
Turn on the VCR
Plug in power cord to the
Outlet strip as shown in the
Appendix
Call for service.
Call for service.
Check that cabling is plugged
into the correct RJ connector
on the Data Router as shown
in the Appendix
Check Data Router
troubleshooting procedures
shown above
Check Dell troubleshooting
procedures shown above
Call for service.
Call for service.