Touch Screen Calibration - E-max BingoConsole Operator's Manual

11.5 Touch Screen Calibration

To calibrate the E-max™ touch screen, follow the procedure below and refer to figure 11.5
Caution: It is recommended that a small object (a pen tip) be used when calibrating
the touch screen. This will ensure the best possible control of the screen for the
console operator.
1. Power up the outlet strip
2. Power up the Back UPS
3. Power up the Dell CPU
4. Log in as the system
administrator
5. select Utilities from the Main
Menu
6. Touch the Calibration button
7. The calibration screen will
appear
8. Touch the Calibration button in
the center of the screen
9. The calibration screen will run
through 9 points on the screen
10. Touch each calibration point as it
appears on the screen
11. When all the points are finished
you will be returned to the
Utilities screen
E-max Gaming Corporation, Inc.
61
Figure 11.5