E-max BingoConsole Operator's Manual page 30

The following demo session will explain the tabs and the settings in those tabs. In this demo session we will
examine the Arrow Organization and then step through each setting. Touch Arrow International in the
Organizations table. This will select Arrow International and fill in the default settings as shown in Figure 6.3.
In the Settings area of the organizations screen are several default settings that can be changed (Figure 6.3).
Touch the EDIT button to edit settings. Touch the SAVE button to save changes when finished.
The Verification drop down list box displays No Last Ball and Last Ball Required. This allows you to select
the verification method for all games in the organization. The Marquee scrolling speed can be adjusted from
slow to medium to fast.
The Number Parts box when enabled (check mark in box) will increment the session game #'s whenever a new
part is created. This feature allows the creation of progressive or multiple part games.
The RNG (Random Number Generator) feature must be installed by maintenance personnel before it can be
activated. This feature can be disabled (shaded out) from the Operator's Console Playing Bingo screen by leaving
the selection box blank. Placing a check mark in the RNG box allows you to select Random Number Generator
during a bingo game from the Operator's Console Screen.
The Caller's Choice feature must be installed by maintenance personnel before it can be activated. When
selected (check mark in box), the Caller's Choice option from PREFS (Preferences) menu on the Operator's
Console Playing Bingo Screen will be enabled. To disable the Caller's Choice option, un-check the Caller's
Choice box.
To display the marquee in the Camera monitor place a check mark in the Show Marquee box by the Camera
Monitor. To turn off the marquee in the Camera Monitor uncheck the box. To show the marquee in the
Message Monitor place a check mark in the Show Marquee box by the Message Monitor. Uncheck the Show
Marquee box to turn off the marquee from displaying in the message monitor.
To display advertisements on the Message Monitor
select ADVERT from the Message Monitor drop
down box. To display the flashboard on the
Message Monitor, select FLASHBOARD from the
Message Monitor drop down box.
Depending on the type of Flashboard you are using,
GAME PATTERN NUMERIC or DOLLAR
VALUE NUMERIC, you can change the output
values by selecting the drop down box of each. This
selection will output the selected value to your
flashboard if it supports the display value you
selected.
Figure 6.3
E-max Gaming Corporation, Inc.
30