E-max BingoConsole Operator's Manual page 42

7.6 Recording a Session
The E-max Bingo Console can record an active gaming session with the (optional) VCR installed. To do this;
follow the procedure below:
1. Insert your media (VHS tape
into your player).
2. Press REC on the VCR
3. Play your Session
4. To View the recorded
Session, go to the Live Game
Screen, touch the Prefs
button. This will bring up the
caller preferences screen.
(figure 7.6)
5. Touch the video button. This
will bring up the video
configuration screen.
6. Select the monitors that you
wish to display the video on
by touching the appropriate
check box and then touch OK.
NOTE: Your VCR is factory preset to work with the E-max™ Bingo Console. During shut down or power failure the
VCR may loose the setting memory. If this happens, set the VCR channel to
input to LINE 1.
operation and care of the VCR.
CAUTION! THE CONSOLE SYSTEM MUST BE POWERED DOWN WITH THE UPS SWITCH
BEFORE SWITCHING OFF OUTLET STRIP #2. FAILURE TO SHUT THE UPS SYSTEM OFF FIRST
WILL RESULT IN INCOMPLETE UPS BATTERY DISCHARGE AND PREMATURE BATTERY
FAILURE NOT COVERED UNDER WARRANTY.
Please refer to the owner's manual of the VCR for further information about the
E-max Gaming Corporation, Inc.
42
Figure 7.6
channel 4 and set the video