Connect The 8680I To Your Network; Pair The 8680I With Bluetooth Devices - Honeywell 8680i User Manual

Connect the 8680i to Your Network

Pair the 8680i with Bluetooth Devices

Note: For additional security, your Bluetooth devices should require a PIN when pairing.
Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode
The 8680i can pair with host Bluetooth devices such as personal computers, lap-
tops, and tablets. In this mode, the host will continually attempt to connect with the
scanner. If the scanner and the host become disconnected, the host will manage
the reconnection.
1. Scan the Host Reconnect Mode bar code below.
2. Set your host device so it searches for other Bluetooth devices. (Refer to your
3. Once your host device has located the scanner, select the 8680i scanner name
Note: See
The Bluetooth symbol appears in the scanner window when the scanner pairs with
a host.
Pair with a PC or Laptop Bluetooth Serial Port: Scanner Reconnect Mode
In this mode, the scanner will continually attempt to connect with the host. If the
scanner and the host become disconnected, the scanner will manage the recon-
nection.
1. Scan the Scanner Reconnect Mode bar code below.
2. Set your host device so it searches for other Bluetooth devices. (Refer to your
3. Once your host device has located the scanner, select the 8680i scanner name
Note: See
12
host device's User's Guide for pairing instructions.)
from the list displayed.
Enter a Bluetooth PIN
host device's User's Guide for pairing instructions.)
from the list displayed.
Enter a Bluetooth PIN
Host Reconnect Mode
on page 15 if your host device displays a PIN.
Scanner Reconnect Mode
on page 15 if your host device displays a PIN.
8680i User Guide