About Network Communications; Connect To A Wi-Fi Network - Honeywell Dolphin CT40 Series User Manual

About Network Communications

You can easily add the mobile computer to your wireless or wired data collection
network. Connect the CT40 your computer using:
•
•
•
•

Connect to a Wi-Fi Network

The computer contains an 802.11 a/b/g/n/ac radio to transfer data using wireless
communications. Before you connect to a Wi-Fi network, you need to know about
your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. On the list, tap a network name to initiate a connection.
5. Enter any required information if the network is secured (e.g., password, key or
6. Tap Connect.
Once you connect to a saved Wi-Fi network:
•
•
•
•
62
802.11 a/b/g/n/ac radio communications.
Ethernet communications.
Bluetooth communications.
USB and serial communications.
> Network & Internet > Wi-Fi.
the toggle button to turn the Wi-Fi radio On
networks appears.
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
certificate name).
Tap the network name on the list to view details (e.g., status, signal strength,
speed, frequency, security type). Select Cancel to close details screen.
The computer automatically connects to the same network when the network is
in range and the Wi-Fi radio is turned on.
To remove a network from your saved list, tap and hold the network name and
select Forget. You can do this for networks you no longer use.
To view a list of only your saved networks, tap
networks.
. A list of discovered
, and then select Saved
Dolphin CT40 Mobile Computer