Honeywell 8680i Quick Start Manual

Mini wearable mobile computer
Hide thumbs

Advertisement

8680i
Mini Wearable Mobile Computer
Quick Start Guide
8680-EN-QS Rev A
5/18

Advertisement

loading

  Also See for Honeywell 8680i

  Related Manuals for Honeywell 8680i

  Summary of Contents for Honeywell 8680i

  • Page 1 8680i Mini Wearable Mobile Computer Quick Start Guide 8680-EN-QS Rev A 5/18...
  • Page 2 Overview Battery Battery latch Right button User window Scanner Trigger Left button Note: The battery must be fully charged before the first use. An MB4-BAT-SCN02 or an MB4-SCN02 Charging Station must be purchased separately.
  • Page 3: Attach The Scanner To Your Hand

    Attach the Scanner to Your Hand...
  • Page 4 Pull the finger strap to secure it and tuck the excess strap length into the finger guide channel.
  • Page 5 Right or Left Handed Operation To release the finger trigger, turn over the scanner. Slide the latch toward the user window to release the finger trigger. Turn the finger strap around and snap it into place to change the operation to the correct hand.
  • Page 6: Power Up The Scanner

    Power Up the Scanner Press the trigger to power up the scanner. The battery, WiFi, and Bluetooth status appear in the window. User Window The user window displays prompts for using the scanner in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts.
  • Page 7: How To Scan A Bar Code

    Warning: Do not stare directly into the laser beam. How to Scan a Bar Code The 8680i scanner has a view finder that projects a bright aim- ing pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read.
  • Page 8 Once your host device has located the scanner, select the 8680i scanner name from the list displayed. Note: Refer to the 8680i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
  • Page 9 Once your host device has located the scanner, select the 8680i scanner name from the list displayed. Note: Refer to the 8680i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
  • Page 10: Disconnect From The Host

    Once your host device has located the scanner, select the 8680i scanner name from the list displayed. Note: Refer to the 8680i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
  • Page 11: Pair With An Android™ Mobile Device

    Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8680i by touching the devices together. Make sure the NFC setting is On in your phone. Touch the Android phone to the scanner.
  • Page 12: Pair With A Honeywell Vehicle Mount Computer

    Scan the Bluetooth HID Keyboard Disconnect bar code below. Bluetooth HID Keyboard Disconnect Use the 8680i to scan the EZPairing bar code that is either supplied with the device, attached to the device, or displayed on the screen. The EZPairing bar code begins with {FNC3}LnkB, followed by 10 digits, like the sample below.
  • Page 13: Reset Custom Defaults

    Reset Custom Defaults If you want the custom default settings restored to your 8680i, scan the Activate Custom Defaults bar code below. This is the recommended default bar code for most users. It resets the 8680i to the custom default settings. If there are no custom defaults, it resets the 8680i to the factory default settings (Blue- tooth HID Keyboard Emulation).
  • Page 14: User Documentation

    When the battery is low, the 8680i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right and left buttons at any time to view the battery’s charge status. To replace the battery, squeeze the battery latch and lift up on the battery.
  • Page 15: Limited Warranty

    Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
  • Page 16 Microsoft® Windows®, Windows NT®, Windows 2000, Windows ME, Windows XP, and the Windows logo are trademarks or regis- tered trademarks of Microsoft Corporation. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. Android™ is a trademark of Google Inc. Apple is a trademark of Apple Inc., registered in the U.S.