Honeywell 8680i User Manual page 171

T - Wait for Trigger
Waits for a hardware trigger press before taking the image. This is only available
when using Photo Style (1P).
L - LED State
Determines if the LEDs should be on or off, and when. Ambient illumination (0L) is
preferred for taking pictures of color documents, such as ID cards. LED State is not
available when using Decoding Style (0P).
E - Exposure
Exposure is used in Manual Style only (2P), and allows you to set the exposure
time. This is similar to setting a shutter speed on a camera. The exposure time
determines how long the 8680i takes to record an image. On a bright day, exposure
times can be very short because plenty of light is available to help record an image.
At nighttime, exposure time can increase dramatically due to the near absence of
light. Units are 127 microseconds. (Default = 7874)
Example:
8680i User Guide
0T Takes image immediately (default)
1T Waits for a trigger press, then takes the image
0L LEDs off (default)
1L LEDs on
nE Range: 1 - 7874
Exposure at 7874E with
fluorescent lighting:
Exposure at 100E with
fluorescent lighting:
157