Honeywell 8680i User Manual page 128

UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the begin-
ning of the scanned data, but can be programmed so it is not transmitted (Off).
Default = On.
UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
114
* On
* On
2 Digit Addenda On
5 Digit Addenda On
Off
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
8680i User Guide