Honeywell 8680i User Manual page 140

Don't Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda, and
you want to disable this feature, scan Don't Require 5 Digit Addenda. EAN-13 bar
codes are transmitted, depending on the setting you are using for
Addenda
Default = Don't Require 5 Digit Addenda.
* Don't Require 5 Digit Addenda
Addenda Timeout
You can set a time during which the 8680i looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
(in milliseconds) for this timeout by scanning the bar code below, then setting the
timeout (from 0-120 milliseconds) by scanning digits, then the Save bar code from
the
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the bar code and
the data from the addenda. When turned Off, there is no space. Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to
EAN-13 with Extended Coupon Code
126
Required.
Programming Chart
* On
UPC-E0 Addenda
on page 235. Default = 500.
Addenda Timeout
(page 116).
EAN/JAN-13
Require 5 Digit Addenda
Required. Set the length
Off
UPC-A/
8680i User Guide