Code 39 - Honeywell 8680i User Manual

Codabar Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 2-60. Minimum Default = 4, Maximum Default = 60.
Minimum Message Length

Code 39

Code 39 On/Off
If you are reading Code 39 bar codes, Codablock A should remain disabled. If you
are enabling Codablock A (see
39.
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don't Trans-
mit.
8680i User Guide
(page 94) for additional information. Minimum and Maximum
< Default All Code 39 Settings >
* On
Transmit
Codablock A on page 133), you should disable Code
Message Length
Maximum Message Length
Off
97