Led - Good Read; Number Of Beeps - Good Read; Number Of Beeps - Error - Honeywell 8680i User Manual

LED – Good Read
The green LED checkmark can be programmed On or Off in response to a good
read. Default = On.
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps are applied to the beeper and LED in response to a good read. For
example, if you program this option to have five beeps, there will be five beeps and
five LED flashes in response to a good read. The beeps and LED flashes are in sync
with one another. To change the number of beeps, scan the bar code below and
then scan a digit (1-9) bar code and the Save bar code from the
Chart
Number of Beeps – Error
The number of beeps and LED flashes emitted by the 8680i for a bad read or error
can be programmed from 1 - 9. For example, if you program this option to have five
error beeps, there will be five error beeps and five LED flashes in response to an
error. To change the number of error beeps, scan the bar code below and then scan
a digit (1-9) bar code and the Save bar code from the
235. Default = 1.
8680i User Guide
* LED - Good Read On
on page 235. Default = 1.
Number of Good Read Beeps/LED Flashes
Number of Error Beeps/LED Flashes
LED - Good Read Off
Programming
Programming Chart on page
45