Pair With A Honeywell Communication And Charge Base Or Access Point - Honeywell 8680i User Manual

1. Scan the Bluetooth HID Keyboard Disconnect bar code below.
2. Use the 8680i to scan the EZPairing bar code that is either supplied with the
The Bluetooth symbol appears in the user window when the 8680i pairs with a
host. Once the 8680i battery is charged and you have paired it to a host device, you
may begin scanning bar codes. Verify the 8680i operation by scanning a bar code
from the
Pair with a Honeywell Communication and Charge Base
or Access Point
The 8680i can communicate with the following Honeywell Communication and
Charge base (CCB) and Honeywell Bluetooth Access Points:
Granit CCBs:
•
•
Xenon CCBs:
•
Access Points:
•
•
•
8680i User Guide
device, attached to the device, or displayed on the screen. The EZPairing bar
code begins with {FNC3} LnkB, followed by 12 digits, like the sample below.
Sample Symbols,
CCB02-100BT-07N
CCB05-100BT-07N
CCB01-010BT-07N
AP-100BT-07N
AP05-100BT-07N
AP-010BT-07N
Bluetooth HID Keyboard Disconnect
beginning on page 233.
17