Honeywell 8680i User Manual page 154

QR Code Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 1-7089. Minimum Default = 1, Maximum Default = 7089.
Minimum Message Length
QR Code Append
This function allows the 8680i to append the data from several QR Code bar codes
together before transmitting them to the host computer. When the 8680i encoun-
ters an QR Code bar code with the append trigger character(s), it buffers the num-
ber of QR Code bar codes determined by information encoded in those bar codes.
Once the proper number of codes is reached, the data is output in the order speci-
fied in the bar codes. Default = On.
QR Code Page
QR Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
140
(page 94) for additional information. Minimum and Maximum
* On
Off
Message Length
Maximum Message Length
Off
ISO 2022/ISO 646
8680i User Guide