Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ memory cards with the computer for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options.
Install the Battery The CK75 mobile computer ships with a Lithium-ion 3.7 V, 5200 mAH (19.24 Wh) battery manufactured for Honeywell Interna- tional Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
Charge the Computer The CK75 mobile computer ships with a partially charged battery. Charge the battery with a 70 Series charging device for a minimum of 6 hours. Using the computer while charging the battery increases the time required to reach a full charge. If the terminal is drawing more current than supplied by the charging source, charging will not take place.
Turn Power On/Off The computer automatically turns on when you install the battery pack. Note: You should always power off the computer before removing the battery. To turn the computer off: Press and hold the Power button until the options menu appears.
About the Home Screen Notification / Status Bar Search Bar Touch initiate a voice search or Home Screen command. Panel Favorites Tray Navigation Buttons Touch the All Apps icon to access apps and settings. To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Buttons Description Function Back Return to the previous screen. Recent Apps View and switch between recently used apps. Home Return to Home screen. Volume Raises or lowers the volume of the speaker. Scan Trigger the scanner. To learn more about how to use the keypad for your computer model, see the user guide.
Scan a Bar Code Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. Touch All Apps > Demos > Scan Demo. Point the computer at the bar code. Touch and hold Scan on the touch screen or press and hold the Scan button.
Take a Photo or Video Touch on the Home Screen. The camera application opens on the computer. Swipe from the left side of the screen to select either single photo mode or video mode Point the camera lens at the object you want to capture. The camera lens is located on the back of the computer.
Under Computer, click on CX75 NCF. You can now copy, delete and/or move files or folders between the computer and CK75 or a microSD card installed in the CK75 as you would with any other storage drive (e.g., cut and paste or drag and drop).
Restart the Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Microsoft Corporation in the United States and/or other countries. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.