5.12 Equipment Return - Ametek IntelliPoint RF RML Series Installation And Operating Instructions Manual

IntelliPoint RF RML Series

5.12 Equipment Return

In order to provide the best service, any equipment being
returned for repair or credit must be pre-approved by the
factory.
In many applications, sensing elements are exposed to
hazardous materials.
• OSHA mandates that our employees be informed and
protected from hazardous chemicals.
• Material Safety Data Sheets (MSDS) listing the
hazardous materials to which the sensing element
has been exposed MUST accompany any repair.
• It is your responsibility to fully disclose all chemicals
and decontaminate the sensing element.
To obtain a Return Authorization Number (RA#), contact the
Service department at 1-800-527-6297 (US and Canada) or
+1-215-674-1234.
Please provide the following information:
• Model Number of Return Equipment
• Serial Number
• Original Purchase Order Number
• Process Materials to which equipment has been exposed.
• MSDS sheets for any hazardous materials
• Billing Address
• Shipping Address
• Purchase Order Number for Repairs
Please include a purchase order even if the repair is under
warranty. If repair is covered under warranty, you will not be
charged.
Ship equipment freight prepaid to:
AMETEK-DREXELBROOK.
205 KEITH VALLEY ROADzz
HORSHAM, PA 19044-1499
COD shipments will not be accepted.
28
Troubleshooting